Product information

Use & Care Guide

Lamitak laminates are durable, abrasion resistant and impact resistant under normal use. To better care for your laminates:

  • Do not chop, slice, or hammer directly on the laminate surface.
  • Do not use sharp objects such as knives or box-cutters on the laminate surface.
  • Do not place hot cookware directly on the laminate surface.
  • Do not expose the laminate to temperatures of 60°C for prolonged periods, which may cause the laminate to separate from substrate
  • Do not flood the laminate or introduce water at joints, which may cause the substrate to expand.


Watch video  

Our laminates are easy to clean:

  • Use warm water and a clean non-abrasive cloth to remove most stains.
  • Use a mild household cleaner or detergent if necessary and rinse with clean water
  • Dry the surface with a clean non-abrasive cloth.

Special attention may be required for stubborn stains - apply a small amount of thinner on a clean non-abrasive cloth to gently remove stain and rinse the area with another clean damp cloth. Avoid using any cleaning agent containing acid, alkali or sodium hypochlorite, as they may corrode, discolour or ruin the surface of the laminate.


Newedge Available

Watch video  
  • Denotes NewedgeTM edgebands are available.
  • Refer to index and specifications page for Newedge details

Vertical Application

  • Denotes laminate is best applied vertically
  • Due to special treatments on these laminates, constant abrasion to surface may affect its finish.

Best Viewed in Large Format

  • Recommended to view sample in large format.
  • Certain design details of the laminate may not appear in the catalogue sample.

Surface finishes

RXLOther Finishes


Green Label Singapore certification, or low emissions and low toxicity.

Lamitak has achieved GREENGUARD certification for indoor airquality.

Lamitak has been issued TÜV SÜD Certification as it has demostrated compliance to international standards.

Class ‘0’ Fire Rating

Lamitak laminates are rated Class ‘0’ under TÜV SÜD PSB’s surface spread of flame and fire propagation tests. Kindly contact us for a test report.

Lamitak Laminates

  • Typically conform to the requirements of ISO 4586.
  • Are 4.0ft x 8.0ft x 0.7mm (+/- 10%) unless otherwise stated.
  • Are selectively available in 4.0ft x 10.0ft upon request.
  • Postforming grade is available on an indent basis only.

Buyers Safeguard

Watch video  

All our laminate designs are crafted and fine-tuned to the slightest detail. Insist on the original and be certain of its authenticity. We recommend checking your finished product against the samples in this Lamitak portfolio. Alternatively, you may request for sample laminate chips at any of our offices.


Kindly inspect all products prior to installation. We warrant solely to the original Buyer that the products will be free from defects in materials under guidelines of ISO 4586 – Part 1 & 2, when given normal, proper and intended usage, and limit to the extent of the cost of product only for a period of 3 years from the date of sale to the Buyer. Lamitak is wholly owned by TAK Products and Services Pte Ltd. All rights reserved.